Product Description

PROPERTIES / ADVANTAGES

Specially formulated for finishing applications.

The product is easy to use with highly controlled rheological properties providing high resistance to sagging.

This product has good resistance to yellowing over time.

It has good gloss retention properties.

This product has good water resistance properties. Top coats are not intended for constant water immersion applications.

This product has resilient mechanical properties.

USE AREAS

This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish.

*It should not be used as a gel coat.

This topcoat is formulated to meet the rigid requirements of transportation, boating and sanitary applications.

APPLICATION

This top coat is ready to use by application with a brush.

Mix the product slowly but thoroughly for 10 minutes prior to each shift start up. Apply the correct film thickness. A wet film thickness between 300 to 600pm is required ideally working with a brush to ensure a level even thickness of 500 micron

Check that the correct level of MEKP is added. A level of 1,8% is recommended.
*Do not use more than 3% or lower than 1,2% MEKP catalyst.

Minimum application temperature : 15°C

This product is not designed for use with a spray gun.

Additional information

Data Sheets