USES

• Topcoat for Ultraflex liquid system on flat roofs.
• Ultraflex Topcoat for car parks with a very light traffic (private car parks).
• Protection layer for Ultraflex on balconies, walkways and maintenance strips.

GENERAL FEATURES

ULTRATOP is a glossy, aliphatic, single component, pigmented, polyurethane resin .
Tack free time: 25 minutes; pot life: 3 hours

It forms a protection coating, easy to clean and maintain and resistant to algae and mold growth.

ULTRATOP should be applied in dry conditions avoiding the presence of humidity or water coming from the surface to be coated or the substrate, whether at the time of application or subsequently .

Apply on dry, firm substrates, with a surface temperature of between 3 ºC above dew point, an
ambient temperature of at least 10 ºC.

ULTRATOP must be applied in thin layers, with roller, brush or airless spray equipment (nozzle: 0.007” to 0.011”; nozzle tip pressure, 180 to 200 kg/m²).
It can be thinned using pure xylene, up to 5% for applications with airless spray equipment.
Do not apply on swimming pools or, in general, on surfaces that subject to total immersion.

ULTRATOP can be applied as a non-slip finish as follows: Apply a thin layer of ultratop and broadcast silica sand or aggregate. If required an additional layer of Ultratop can be applied on
the aggregate to encapsulate the antislip system.

YIELD

The yield of Ultratop varies depending on the layers applied, the type of substrate or the final
use. It is applied in thin layers, consumption is approximately 150~175 g/m²/layer.

PACKAGING

5kg tins – coverage 30 sqm aprox

SHELF LIFE

Expires after 12 months, at temperatures between 5° C and 35°, provided it is stored in a dry place.