Gelcoat Brush White – Polycor BR ISO 9199 (25kg)
How To Order Our Products
A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin.
It is cured using MEKP peroxide.
PROPERTIES / ADVANTAGES
The product is easy to use with highly controlled rheological properties providing high resistance to sagging.
This product has good resistance to yellowing over time. shift start up.
It has good gloss retention properties.
This product has good water resistance properties.
This product has resilient mechanical properties.
Product is available in clear, white, off-white and wide range of colours and can be colour matched according to a particular demand.
The product is formulated to assure a hide in wet film thickness of 500µm. However some bright shades may have a hide slightly lower
This gel coat is ready to use by application with a brush.
Mix the product slowly but thoroughly for 10 minutes prior to each shift start up. Apply the correct film thickness.
A wet film thickness between 300 to 600μm is required ideally working with a brush to ensure a level even thickness of 500 micron.
Check that the correct level of MEKP is added. A level of 1.8% is recommended. Do not use more than 3% or lower than 1.2% MEKP catalyst.
Minimum application temperature : 15°C
This product is not designed for use with a spray gun.
USE AREAS STORAGE
This gel coat is formulated to meet the rigid requirements of transportation, boating and sanitary applications.