By using our website, you agree to the use of our cookies.
01925 812809 Unit 19 Riverside Ind Est, Woolston, Warrington, WA1 4BA Hours: Mon to Fri 8am-4.30pm Sat's closed for the foreseeable future.


Gelcoat Brush White – Polycor ISO BR 9199 (2kg)


SKU: 2021
How To Order Our Products

A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin.

It is cured using MEKP peroxide.


The product is easy to use with highly controlled rheological properties providing high resistance to sagging.
This product has good resistance to yellowing over time. shift start up.
It has good gloss retention properties.
This product has good water resistance properties.
This product has resilient mechanical properties.


SKU: 2021 Categories:,

Product Description


Product is available in clear, white, off-white and wide range of colours and can be colour matched according to a particular demand.
The product is formulated to assure a hide in wet film thickness of 500µm. However some bright shades may have a hide slightly lower


This gel coat is ready to use by application with a brush.
Mix the product slowly but thoroughly for 10 minutes prior to each shift start up. Apply the correct film thickness.
A wet film thickness between 300 to 600μm is required ideally working with a brush to ensure a level even thickness of 500 micron.
Check that the correct level of MEKP is added. A level of 1.8% is recommended. Do not use more than 3% or lower than 1.2% MEKP catalyst.
Minimum application temperature : 15°C
This product is not designed for use with a spray gun.


This gel coat is formulated to meet the rigid requirements of transportation, boating and sanitary applications.


Additional information

Weight 2 kg

Data Sheets

thumbnail of POLYCOR_ISO_BR_WHITE_9199_EN
Technical Data Sheet (TDS)
thumbnail of MSDS-Polycor-ISO-BR
Material Safety Data Sheet (MSDS)
WordPress Theme built by Shufflehound. Copyright (c)  GRP[UK] LTD 2017 - All Rights Reserved - Web Design and Hosting by TADAH