By using our website, you agree to the use of our cookies.
01925 812809 Unit 19 Riverside Ind Est, Woolston, Warrington, WA1 4BA Hours: Mon to Fri 8am-4.30pm Sat's closed for the foreseeable future.


Optimold II Monocomposant (25kg)


SKU: 1187
How To Order Our Products

*Barrels are available upon request*


A pre-accelerated unsaturated polyester resin, filled and thixotroped.

It is cured using MEKP peroxide.


Due to its no shrinkage characteristics, dimensional stability of part is

maintain after curing of paste.

The product is easy to use with highly controlled rheological

properties providing high resistance to sagging.


The product is recommended for mould manufacture.


The product is ready to use.


SKU: 1187 Categories:, ,

Product Description

*Barrels are available upon request*


This product is ready to use by application with airless spray

equipment or by hand lay up.

Mix the product slowly but thoroughly for 10 minutes prior to each

shift start up.

Check that the correct level of MEKP is added. A level of 1.5% is

recommended. Do not use more than 2% or lower than 1% MEKP



Shelf-life : 4 Months

When the product is sealed in its original packing, stored indoors

away from direct sunlight and direct heat sources and ideally at

ambient temperature between 15ºC and 25ºC .




Additional information

Weight 25 kg

Data Sheets

Material Safety Data Sheet (MSDS)
Material Safety Data Sheet (MSDS)
Technical Data Sheet (TDS)
Technical Data Sheet (TDS)
WordPress Theme built by Shufflehound. Copyright (c)  GRP[UK] LTD 2017 - All Rights Reserved - Web Design and Hosting by TADAH