By using our website, you agree to the use of our cookies.
01925 812809 Unit 19 Riverside Ind Est, Woolston, Warrington, WA1 4BA Hours: Mon to Fri 8am-4.30pm Sat's closed for the foreseeable future.

Shop

Marbocote Mould Sealer (1ltr)

£49.95

SKU: 8114
How To Order Our Products

Marbocote Mould Sealer is an advanced polymeric resin in an organic solvent blend.
The resin seals micro porosity and fills minor scratches on the mould surface resulting in a smooth, high gloss surface primed for Marbocote topcoat application.
Recommended Uses: Marbocote Mould Sealer is especially recommended for use on new moulds and repaired areas on older moulds. Marbocote Mould Sealer can be applied on all types of glass reinforced polyester (gel coatedor nongel coated GRP), vinyl ester, epoxy or metal moulds.

Product Benefits:
  • Quick and easy application
  • Efficient mould sealer and primer
  • Enhances mould gloss
  • Low odour
  • Minimal mould buildup
  • Versatile, can be used on all mould surfaces
  • Durable, provides multiple releases per application

Product Description

Marbocote semi permanent release agents are curing dry film non transferring products.

We have both solvent and water based grades which can be cloth or spray applied.

The benefits are:

  • Multiple release
  • Non transfer
  • Excellent surface finish
  • Consistent surface finish
  • Quick to apply
  • Chemically inert
  • Low cost per part
  • Aerospace approved

Why Release Agents?

Whether release agents are incorporated into the resin matrix or applied externally to the mould surface, correct selection can optimise not only cycle time, but also consistency of surface finish maintaining detail, minimising post mould operation prior to painting or bonding, even helping with fibre wet out. To work well a release agent must fit within the scope of the overall process and be cost effective. Application must be simple with clearly defined steps, drying times should be short and cure time if any must not delay the process. The product must not contain any ingredients which will affect the final product properties or post mould treatments. Finally release must be smooth and clean with no pre-release prior to cure. Qualification costs are high and Marbocote ensure their products and chemical pre-cursors are available long term, anticipating changes in legislation and using safe ingredients whenever possible

Quality Certification

Marbocote are independently assessed to BS EN ISO 2008 ,ISO 9001:2015, & ISO 9001 + ISO 14001.possible Marbocote will supply products that are not harmful to the environment, and are safe to use. Only too pleased to assist with any environmental concerns you may have.

Choose the correct Product

 

thumbnail of Product Summary Sheet
Product Summary Sheet
thumbnail of Product Selector Chart
Product Selector Chart

FAQ

thumbnail of FAQ
Frequently asked questions.

Application Guide

thumbnail of Application Guide Mould Sealer
Application Guide Mould Sealer

Data Sheets

thumbnail of Marbocote Mould Sealer TDS v8
Technical Data Sheet (TDS)
thumbnail of Marbocote_Mould_Sealer_English_v2_0_0
Material Safety Data Sheet (MSDS)
WordPress Theme built by Shufflehound. Copyright (c)  GRP[UK] LTD 2017 - All Rights Reserved - Web Design and Hosting by TADAH