By using our website, you agree to the use of our cookies.
01925 812809 Unit 19 Riverside Ind Est, Woolston, Warrington, WA1 4BA Hours: Mon to Fri 8am-4.30pm Sat's closed for the foreseeable future.

Shop

Marbocote Fastcote (5ltr)

£129.95

SKU: 8116
How To Order Our Products

Marbocote Fastcote is ideally suited for high gloss applications. The product is easy and quick to apply and produces a high gloss durable finish capable of giving many releases before reapplication is necessary.

It will not contaminate the released surface. Marbocote Fastcote is an advanced polymeric resin in a nonchlorinated organic solvent blend.

Recommended Uses: Marbocote Fastcote can be applied on all types of non porous molds such as steel, aluminum and composite and will release gel coated glass reinforced polyester (GRP), vinyl ester, phenolic or epoxy components.

Product Benefits:

  • Quick and easy application
  • Noncontaminating
  • Nonchlorinated solvents
  • Low odour
  • Minimal mould buildup
  • Versatile, can be used on all mould surfaces
  • Durable, provides multiple releases per application

Product Description

Marbocote semi permanent release agents are curing dry film non transferring products.

We have both solvent and water based grades which can be cloth or spray applied.

The benefits are:

  • Multiple release
  • Non transfer
  • Excellent surface finish
  • Consistent surface finish
  • Quick to apply
  • Chemically inert
  • Low cost per part
  • Aerospace approved

Why Release Agents?

Whether release agents are incorporated into the resin matrix or applied externally to the mould surface, correct selection can optimise not only cycle time, but also consistency of surface finish maintaining detail, minimising post mould operation prior to painting or bonding, even helping with fibre wet out. To work well a release agent must fit within the scope of the overall process and be cost effective. Application must be simple with clearly defined steps, drying times should be short and cure time if any must not delay the process. The product must not contain any ingredients which will affect the final product properties or post mould treatments. Finally release must be smooth and clean with no pre-release prior to cure. Qualification costs are high and Marbocote ensure their products and chemical pre-cursors are available long term, anticipating changes in legislation and using safe ingredients whenever possible

Quality Certification

Marbocote are independently assessed to BS EN ISO 2008 ,ISO 9001:2015, & ISO 9001 + ISO 14001.possible Marbocote will supply products that are not harmful to the environment, and are safe to use. Only too pleased to assist with any environmental concerns you may have.

Choose the correct Product

 

thumbnail of Product Summary Sheet
Product Summary Sheet
thumbnail of Product Selector Chart
Product Selector Chart

FAQ

thumbnail of FAQ
Frequently asked questions.

Application Guide

thumbnail of GRP UK MCote Fastcote Procedures
Application Guide

Data Sheets

thumbnail of Marbocote Fastcote TDS v5
Technical Data Sheet (TDS)
thumbnail of Marbocote_Fastcote_English_v2_0_0
Material Safety Data Sheet (MSDS)
WordPress Theme built by Shufflehound. Copyright (c)  GRP[UK] LTD 2017 - All Rights Reserved - Web Design and Hosting by TADAH